The Iconotech imaging film consists of a non-woven, natural fiber tissue laminated to a very thin PET film of less than 2 microns. The components of the film and the precise lamination produce a unique product designed specifically for the Iconotech printing process. Creating print messages on the film using the thermal imager and imaging software supplied by Iconotech results in 200 DPI print on corrugated board which gives optimal clarity for printing on corrugated. The strength of the lamination allows trained operators to obtain a yield upwards of 5000 prints per film.
The imaging film is supplied in rolls of 295.3 ft in length,12 inches wide and yields approximately 90 print films. It takes less than 30 seconds to output a print message to the thermal imager and a trained operator can change over the imaged film on the Iconotech Case Printer from one print message to the next in less than 2 minutes.